All Rotary Screw Air Compressors
This category includes both light industrial, as well as heavy-duty lubricated and oil-free rotary screw air compressors (4 - 3169 CFM).
Shop All
Light Industrial Rotary Screw Air Compressors
These 3 to 30 HP compressors typically fall into the low-capacity category, delivering between 10 and 125 CFM (cubic feet per minute) of air flow.
Shop Light Industrial

Air Dryer Accessories

Aftercoolers

Lubricants

Lubricants

Hose & Reels

Tank Accessories

Monitors

Dew Point Meter

Pressure & Flow Control

Condensate Management

Replacement Desiccant

Desiccant

FPZ

FPZ is known for being a manufacturer of high performance regenerative blowers that are used to move air in pressure or vacuum systems as well as a range or blowers suitable for handling gases such as methane or biogas.

your friendly engineer

Questions? Call one of our experts at 1-866-778-6572.

Filter FPZ

CATEGORY: Parts (); FPZ Parts (); Regenerative Blowers ()

IN STOCK: No ()

FPZ MS Series Regenerative Blower

FPZ MS Series Regenerative Blower

SCL, 0.75 to 20 HP, single stage blower with TEFC cURus motor and high efficiency impeller, mountable in any position.

Select options for pricing

FPZ Evolution Series Regenerative Blower

FPZ Evolution Series Regenerative Blower

SCL, 5.5 to 30 HP single- or two-stage blower with 304 to 1492 CFM capacity.

Select options for pricing

FPZ MD Series Regenerative Blower

FPZ MD Series Regenerative Blower

SCL, 1.5 to 4 HP, single impeller two-stage blowers, for applications where higher pressures are required.

Starting at $1,871.61

FPZ 06 Series Regenerative Blower

FPZ 06 Series Regenerative Blower

Quiet operation blower with low weight cast aluminum construction and TEFC cURus motor.

Starting at $634.84

FPZ TS Series Regenerative Blower

FPZ TS Series Regenerative Blower

SCL, 5.5 to 25 HP, twin impeller, single stage blower. Designed for high airflow applications, 290 to 1093 CFM.

Starting at $3,246.77

FPZ 15DH Series Regenerative Blower

FPZ 15DH Series Regenerative Blower

SCL, 0.75 to 1 HP single stage blower requiring no lubrication or maintenance, mountable in any plane.

Starting at $1,515.48

Safety valve - 3" npt.

Safety valve - 2" npt.

Used on SCL 40DH (blower is out of production).

Used on model(s) K05-6MS.

450V-55 mfd capacitor for 1.5 hp and 2 hp Bonora 1 phase motors.

Silencer - Steel - Male x End mount - GAS threads.

In-line filter (vacuum applications).

Call for pricing

Indoor intake filter.

Call for pricing

Swing check valve - F x F.

Safety valve - 4" npt.

Cyclone In-Line filter.

Call for pricing

Replacement cartridge filter for FL8 paper.

Call for pricing

Cast aluminum foot bracket for vertical mounting.

Call for pricing

Replacement filter element with prefilter.

Replacement cartridge filter for FL6 paper.

Call for pricing

Replacement element for FC8 filter.

Call for pricing

Female flange - used on all 5" blowers.

Flange Connector - allows direct connection of safety val.

Used on model(s) k09-11 MS.

Flexible connection.

Replacement cartridge filter for FL9&10 paper.

Call for pricing

Safety valve (vacuum or pressure) 10DL, 15DH, 06.

Cyclone In-Line filter.

Call for pricing

In-line filter (vacuum applications).

Call for pricing

Replacement cartridge filter for FL1 paper.

Call for pricing

Replacement element for FV6 filter.

Call for pricing

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Replacement filter element with prefilter.

2" npt 90 deg PVC inlet filter manifold.

Replacement filter element with prefilter.

Used on model(s) 40DH-R (out of production).

Filter manifold for FL10.

Replacement cartridge filter for FL2-3-4 paper.

Call for pricing

Inlet Protector - stainless steel screen - nylon thread.

Female flange - used on FCD.

Female flange - used on: K 03 MS, SCL R20-R40.

Rubber feet (larger size).

Female flange - used on: OLD O6 and 15DH.

Inlet Protector - stainless steel screen - nylon thread.

Replacement filter element.

Female flange - used on FCD.

Female flange - used on: K 04 MS; fits R series.

Replacement filter element.

Inlet Protector - stainless steel screen - nylon thread.

Sleeve for flexible connection mounting - Aluminum.

Female flange - used on all 2" blowers and FCD.

Inlet Protector - stainless steel screen - nylon thread.

Sleeve for flexible connection mounting - Aluminum.

Sleeve for flexible connection mounting - Aluminum.

Sleeve for flexible connection mounting - Aluminum.

Female flange - used on all 3" blowers and FCD.

Female flange - used on all 4" blowers.

Sleeve for flexible connection mounting - Aluminum.

Swing check valve - F x F.

Tube connector - allows direct connection of flexible hose.

Replacement element for FV5 filter.

Call for pricing

Flexible connection.

Swing check valve - F x F.

Swing check valve - F x F.

Replacement cartridge filter for FL5 paper.

Call for pricing

Indoor intake filter.

Call for pricing

Flexible connection.

Replacement filter element with prefilter.

Replacement filter element.

Sleeve for flexible connection mounting - Aluminum.

Replacement element for FV8 filter.

Call for pricing

Flexible connection.

Flange Connector - allows direct connection of safety val.

400V-36 mfd capacitor for 2 hp IP 65 lafert WBR.

400V -31.5 mfd capacitor for 1 hp Lafert 1 phase motor.

400V -20 mfd capacitor for 0.75 hp Lafert 1 phase motor.

400V-16 mfd capacitor for 1/3 + 1/2 hp Lafert 1 phase motors.

Silencer - Steel - Male x End mount - GAS threads.

Silencer - Steel - Male x End mount - GAS threads.

Replacement element for FC5 filter.

Call for pricing

Indoor intake filter.

Call for pricing

Inlet filter with weather hood.

Call for pricing

Inlet filter with weather hood.

Call for pricing

Flexible connection.

Tube connector - allows direct connection of flexible hose.

Silencer - Steel - Male x Male - GAS threads.

Flexible connection.

Silencer - Steel - Male x Male - GAS threads.

Silencer - Steel - Male x Male - GAS threads.

450v-45 mfd capacitor for 1.5 hp (New Lafert).

450v-40 mfd capacitor for 1 hp (New Lafert).

Replacement element for FC6 filter.

Call for pricing

Sleeve for flexible connection mounting - Fe (cut nipple).

Filter manifold for(K series).

Swing check valve - F x F.

Filter manifold for(K series and R series).

Inlet filter with weather hood.

Call for pricing

Inlet filter with weather hood.

Call for pricing

Replacement filter element.

Indoor intake filter.

Call for pricing

Flange Connector - allows direct connection of safety val.

Replacement element for FV9 filter.

Call for pricing

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Filter manifold for FL5 (K series).

Used on model(s) O6.

400V -60 mfd capacitor for 3 hp Lafert 1 phase motor.

400V -70 mfd capacitor for 2 hp Lafert or 3 hp Bonora motor (70 mfd-450 v OK).

400V -50 mfd capacitor for 1.5 hp old Lafert+ 2 hp New lafert.

Inlet filter with weather hood.

Call for pricing

Used on model(s) 10DL.

1.5" npt 90 deg PVC inlet filter manifold.

Filter manifold for FL6 (K series).

Filter manifold for FL6 (DH series).

Tube connector - allows direct connection of flexible hose.

FPZ PLX-0000247

galvanized piping assembly used to intall VRL6 + gauge.

Flange Connector - allows direct connection of safety val.

Tube connector - allows direct connection of flexible hose.

Flexible connection.

90 degree manifold kit.

Tube connector - allows direct connection of flexible hose.

Used on model(s) 15DH.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

FPZ PLX-0000251

galvanized piping assembly used to intall VRL6 + gauge.

Inlet filter with weather hood.

Call for pricing

FPZ PLX-0000238

galvanized piping assembly used to intall VRL6 + gauge.

Replacement element for FC9 filter.

Call for pricing

Swing check valve - F x F.

Flexible connection.

Indoor intake filter.

Call for pricing

90 degree manifold kit.

Used on model(s) K03-MS.

Pressure gauge - 0-60" H2O -2.5" dial 1/4" npt back mount.

Pressure gauge - 0-300" H2O -2.5" dial 1/4" npt back mount.

Pressure gauge - 0-200" H2O -2.5" dial 1/4" npt back mount.

Vacuum Gauge - 0-60" H2O - 2" dial 1/4" back mount.

Vacuum Gauge - 0-200" H2O - 2" dial 1/4" back mount.

Vacuum Gauge - 0-300" H2O - 2" dial 1/4" back mount.

Safety valve - high pressure - 2" npt.

Flexible connection.

Indoor intake filter.

Call for pricing

Replacement cartridge filter for FL9&10 Polyester.

Call for pricing

Used on SCL 20DH (blower is out of production).

Used on model(s) K04-MS.

FPZ JDK Series Linear Compressor

FPZ JDK Series Linear Compressor

1 to 4.2 CFM, 115V voltage, oil free design.

Starting at $263.08

Safety valve - Vacuum only - 2".

90 degree manifold kit.

Used on model(s) 20DH-R (out of production).

Used on model(s) 30DH-R (out of production).

Used on model(s) 30DH-STS (blower is out of production.

Replacement filter element.

Used on model(s) 20DH-STS (blower is out of production.

Inlet filter with weather hood.

Call for pricing

SCL 30DH (blower is out of production).

Used on model(s) K03-TS/TD.

Replacement filter element with prefilter.

Safety valve - high pressure - 3" npt.

Used on model(s) K04-TS/TD.

Replacement filter element with prefilter.

Filter manifold for FL8.

Pipe tee with (2) taps for gauges - GAS threads.

Call for pricing

Replacement filter element with prefilter.

90 degree manifold kit.

Used on SCL R20-30 MD (MOR and STS).

3" npt 90 deg PVC inlet filter manifold.

safety valve - 2" npt anodized.

In-line filter (vacuum applications).

Call for pricing

Cyclone In-Line filter.

Call for pricing

90 degree manifold kit.

Replacement filter element with prefilter.

Silencer - Steel - Male x End mount - GAS threads.

Used on model(s) K05-6 TD.

Silencer - Steel - Male x Male - GAS threads.

Silencer - Aluminum 3" npt male x end mount.

Safety valve = 3" npt - anodized.

Filter manifold for FL9.

Used on e07-08 TS GOR / GVR.

Used on e07-08 MD.

Silencer - Aluminum - Male x Male - NPT threads.

90 degree manifold kit.

Silencer - Aluminum - Male x End mount - npt threads.

4" npt 90 deg PVC inlet filter manifold.

Used on model(s) K05-6 TS.

Used on e07-08 MS+TD.

Pipe tee with (2) taps for gauges - GAS threads.

Call for pricing

Cast aluminum foot bracket for vertical mounting.

Call for pricing

Used on e07-08 MD GOR / GVR.

Safety valve - 4" npt anodized.

Swing check valve - F x F.

FPZ PLX-0000239

galvanized piping assembly used to intall VRL6 + gauge.

Used on model(s) K07-8-TD.

Used on e07-08 MS-TD GOR / GVR.

Inlet filter with weather hood.

Call for pricing

BPA Kit - Used on model K04-MS.

Pipe tee with (2) taps for gauges - GAS threads.

Call for pricing

Used on e09-11 MS + MD + TD.

Used on e09-11 MS+MD+TD GOR / GVR.

Sleeve for flexible connection mounting - Fe.

Used on model(s) K07-8-TS.

Used on e07-08 TS.

Used on model(s) 40DH-STS (blower is out of production.

FPZ TKO Series Linear Compressor

FPZ TKO Series Linear Compressor

5.3 to 17.7 CFM at 2.9 PSI, 115V voltage, oil free design.

Starting at $799.23

Indoor intake filter - stainless steel screen.

Call for pricing

FPZ FS-235P-400

Polyester Inlet filter - used on K09-10 MS+TD; K09-12 MD.

BPA Kit Used on model(s) K05-6 TD.

BPA Used on model(s) K05-6MS.

FPZ FS-245P-400

Polyester Inlet filter - used on K07-8 TS; K11-12 MS+TD.

Cyclone In-Line filter.

Call for pricing

Swing check valve - F x F.

SCL R40 MD (MOR and STS).

BPA kit -used on model(s) K07-8-MS.

BPA kit -used on model(s) K09-11.

FPZ PLX-0000250

galvanized piping assembly used to intall VRL6 + gauge.

FPZ KR0043 & KR0044

Used on model(s) 80SH & 80DH & 90SH & 90DH.

Used on 07-K08-TS - BPA.

Inlet filter with weather hood.

Weather Enclosure for models SCL K06 and smaller.

Used on model 90DH-ST.

Used on model(s) K07R-8R-MD.

Used on model(s) K07-8 MD.

Used on model(s) K12-MS; K09-12 MD.

Sound Enclosure for K03-MS-MOR.

Used on model(s) K09-11TD.

FPZ VI6C50+0006

24 VDC Flow converting Device for SCL K04-MS.

Call for pricing

FPZ VI6G50+0002

24 VDC Flow converting Device for SCL K05+ K06-MS.

Call for pricing

Used on e09-11 TS gor / GVR.

Used on model(s) K09-12 TS.

Used on e09-11 TS.

Sound Enclosure for K04-MS-MOR.

FPZ CSL-2541-400I

K07-TS, K08-TS, K11-MS, K12-MS, K11-TD, K12-TD (includes (2) 1/4" taps).

Aluminum tube - Steel flange - Male x End mount - npt th.

FPZ CV 5-502M-1330

Check valve - m x m.

Base for SC9M-1, SC9M-2 & SC10M.

Sound Enclosure for K05-6 MS / 30-40DH MOR.

Sound Enclosure for SCL R20-R30-R40-MD.

Weather Enclosure for models SCL K07 and larger.

FPZ CT-275P-500C*

K09-TS, K10-TS.

Sound Enclosure for K07-8 R MD.

Sound Enclosure for K05-6 TD.

Sound Enclosure for e / K 7-8 MS; k05-06 TS.

Sound Enclosure for e / K07-8 TD.

Sound Enclosure for e / K 09 -12 TS.

Sound Enclosure for e / K 09-10-11-12 TD.

Sound Enclosure for e / K09-10-11-12 MS/MD; e / K07-08.

FPZ CTD-375P-500C

K11-TS, K12-TS.

We’re open Mon - Fri, 8:00 am to 5:00 pm ET

Hank - 2:32 PM

Hello! I’m Hank. No, I’m not real, but I’ve been trained by my Compressor World colleagues to help you get the answers to questions about our products. Ask away!

You - 2:32 PM

What time does the store close?

Compressor World is a member of a family of industrial stores